ATTO FastFrame NT11
Product Highlights
- PCIe 2.0 x8 Network Interface Card
- Single 10 GbE RJ45 Port Configuration
- Data Transfer Rates up to 1.25 GB/s
- Supports Data Center Bridging
- Supports Software iSCSI Initiators
- Full-Height, Low-Profile Form Factor
- Supports Windows, Mac, and Linux
- Overview
- Tech Specs
The FastFrame NT11 Single Port 10GBASE-T PCIe 2.0 Network Adapter from ATTO Technology is built on Ethernet technology, with support for a broad range of operating systems including Windows, Linux and Mac OS X. It has a single RJ45 10 Gigabit Ethernet port and a PCIe Gen 2.0 x8 network interface card that provides maximum throughput for high bandwidth network connectivity for demanding IT, media and entertainment applications, with transfer speeds of up to 1.25 GB/s. It provides throughput and latency management with minimal CPU utilization and power consumption.
General Features
Flexible Solutions Built On Industry-Proven Technology
FastFrame 10GbE NICs simplify networking administration, integrate seamlessly into existing environments, and reduce the total cost of ownership by improving connection bandwidth and eliminating redundant network infrastructure components.
FastFrame NICs provide a flexible and scalable connectivity solution for data center environments. Connect clients to servers, clients to NAS, and by leveraging support for iSCSI initiators, support for connecting into iSCSI storage area networks (SANs).
10GbE Interface
- RJ45 (single)
- Data Center Bridging (DCB)/Enhanced Ethernet
- Flow Control
- MSI Support
- Jumbo frames
- Link Aggregation
Offloads (Reduce CPU Overhead)
- IPv4 Header Checksum
- TCP/UDP Checksum (IPv4 & IPv6)
- VLAN Offload
- IPsec Offload (Windows)
For Windows & Linux
- NUMA & RSS (allows load-balancing across CPUs)
- RMON
- SNMP
- SR-IOV
For Virtualization
- Advanced Packet Filtering
- VM Load Balancing
- VMDq Teaming Support
Host Bus Specifications
- PCI Express 2.0 x8 mechanical and electrical interconnect
- Backward compatible with PCI Express 1.1
- Supports PCIe Base Spec 2.0, CEM Spec 2.0
Driver Support
- Windows, Windows Server
- Linux RHEL, SLES (Latest Kernels)
- macOS
- VMware ESXi
- Thunderbolt-aware driver
Connectivity | |
Networking Ports | 1 x 10Gb Ethernet (RJ45) |
Host Connection | PCIe 2.0 x8 (Full-Height/Low-Profile Slot) |
General | |
Chipset | Intel X540 |
Supported IEEE Standards | 802.1p, 802.1q, 802.1qaz, 802.1qbb |
Operating System Support | Linux, VMware, Windows, macOS/OS X |
Electrical | |
Power Consumption | <8.8 W |
Power Source | Bus Powered |
Environmental | |
Operating Temperature | 32 to 131°F / 0 to 55°C |
Storage Temperature | -40 to 158°F / -40 to 70°C |
Operating Humidity | 5 to 95% |
LED Indicators
- Yes